Product details
FAQ
Essential details
Specification Number:LT-IGST2206F
Product Introduction

LT-IGST2206F 4+2 Port Gigabit Industrial Managed Switch

The LT-IGST2206F is a fully gigabit managed industrial switch designed by NEWBRIDGE® for harsh environment applications. It features 4× 10/100/1000Mbps RJ45 ports and 2× 100/1000Mbps SFP fiber slots – all ports support non‑blocking wire‑speed forwarding. Built to operate reliably from -40°C to +75°C using industrial‑grade components and natural heat dissipation (fanless), it meets the demands of intelligent transportation, rail transit, power, mining, oil & gas, shipping, metallurgy, and green energy. The IP30‑rated metal housing protects against dust and small objects.

The switch supports wide voltage input (9.6V to 60VDC) with triple power redundancy (two sets of V+/V- terminals plus one DC input, Phoenix connector) to maximize uptime. WEB management (HTTPS) provides secure network management, including port management, IEEE 802.1Q VLAN, static link aggregation, port mirroring, loop protection, IGMP snooping v1/v2, QoS (8 queues/port, 802.1p/DSCP), storm control, port isolation, DHCP snooping, and one‑click restore.

With 6KV lightning protection, overload protection (20A), reverse polarity protection (30s), and a 2‑year warranty, this switch delivers a cost‑effective, stable, and reliable industrial communication network.

Key Features

🏭 Industrial Design & Wide Temperature

  • Operating temperature: -40°C to +75°C – fanless, natural heat dissipation, industrial‑grade components.

  • IP30 metal housing, DIN rail mounting.

  • 6KV lightning protection on ports.

🔌 Triple Power Redundancy & Protections

  • Wide voltage input: 9.6V – 60VDC (2× Phoenix terminal pairs + 1× DC input).

  • Overload protection (20A), reverse polarity protection (30s).

  • Redundant power input ensures seamless failover.

🌐 Full Gigabit & SFP Uplinks

  • 4× 10/100/1000Base‑T RJ45 ports + 2× 100/1000Base‑X SFP slots.

  • Switching capacity: 12Gbps; forwarding rate: 8.928Mpps; MAC table: 4K; packet buffer: 2M.

🧠 Web Management & L2 Features

  • Web GUI (HTTPS) – easy configuration and maintenance, one‑click restore.

  • IEEE 802.1Q VLAN (port‑based), port isolation.

  • Static link aggregation – increase bandwidth and redundancy.

  • Loop protection and anti‑loop – prevents network loops.

  • IGMP snooping v1/v2 (256 multicast groups) – optimizes multicast traffic.

  • QoS – 8 queues per port, Diff‑Serv, priority based on port/802.1p/DSCP, Priority Mark/Remark.

  • Port mirroring – traffic monitoring.

  • Storm control (broadcast/unknown unicast/unknown multicast), port speed limit.

  • DHCP snooping – enhances security.

🔌 Plug‑and‑Play & Easy Installation

  • No configuration required for basic switching; advanced features via Web.

  • LED indicators for power (PWR), system (SYS), link/activity, and SFP.

  • Power consumption: <5W.

🛡️ Reliable & Warranty

  • 2‑year warranty.

  • Designed for intelligent transportation, rail, power, mining, oil, shipping, metallurgy, green energy.

Technical Specifications

ParameterSpecification
ModelLT-IGST2206F
Ports4× 10/100/1000Mbps RJ45 + 2× 100/1000Mbps SFP slots
PoENot supported (non‑PoE)
Switching Capacity12Gbps
Forwarding Rate (64Byte)8.928Mpps
MAC Table4K
Packet Buffer2M
Network MediaCat5e/6 for Gigabit, up to 100m; fiber depends on SFP module
ManagementWeb (HTTPS), one-click restore
VLANIEEE 802.1Q port‑based
Link AggregationStatic trunk
MulticastIGMP snooping v1/v2 (256 groups)
QoS8 queues/port, 802.1p/DSCP, Diff‑Serv
SecurityPort isolation, storm control, port speed limit, DHCP snooping, loop protection
DiagnosticsPort mirroring
Power Input9.6V – 60VDC (triple redundant: 2× Phoenix terminals + 1× DC input)
Overload Protection20A
Reverse Polarity Protection30s
Lightning Protection6KV (ports)
Protection RatingIP30
Operating Temperature-40°C ~ +75°C
Storage Temperature-40°C ~ +75°C
Dimensions188×130×50mm
HousingMetal, fanless
InstallationDIN rail


Customer services

Sell on info@cnnewbridge.com

WhatsApp
微信